Paver sealing cost in Palm Beach County runs $0.75–$1.50 per square foot, with quality full-protocol work starting around $1.10 and typical projects totaling $400–$2,000. That’s the county-wide answer. But Palm Beach County isn’t one market — a salt-exposed pool deck in coastal Boca Raton and an inland driveway in Wellington age differently, get quoted differently, and sit under different HOA regimes. We’re a licensed contractor (CILB #U-22487) based in Boca Raton, and most of what we seal is within this county. Here’s the local pricing picture, city by city.
Paver Sealing Cost in Palm Beach County: The Ranges
The county market breaks into the same three tiers as the rest of South Florida:
| Tier | Price per sq ft | What you get |
|---|---|---|
| Budget | $0.75–$1.00 | Pressure rinse + spray. No stain extraction, no re-sanding, commodity sealer. Fails in 12–18 months. |
| Full protocol | $1.10–$1.50 | Pre-treatment, oscillating wash, stain extraction, polymeric sand re-joint, breathable marine-grade sealer, 3-year written warranty. Lasts 2–3 years. |
| Restoration-grade | $2.50+ | Full protocol plus old sealer stripping and heavy stain remediation. |
Market-wide in Florida, basic clean-and-seal quotes span $1.25–$3.50 per square foot, so Palm Beach County pricing sits at the competitive end — there are a lot of pavers here and a lot of contractors sealing them. The dispersion within the county comes less from geography than from what’s actually included in the quote. Our full guide to how much it costs to seal pavers breaks down exactly what cheap quotes silently omit.
City-by-City Notes
Per-square-foot rates are similar across the county; what changes is the mix of surfaces, the salt exposure, and the HOA paperwork.
Boca Raton. Our home base. Heavy HOA and country-club density means ARC applications on most jobs, and a high share of travertine pool decks — which need a penetrating, breathable sealer, not a film. East Boca (coastal) properties should plan on the shorter end of the resealing interval; west of the Turnpike behaves like inland. Details and local specifics on our Boca Raton paver sealing page.
Delray Beach. Similar profile to Boca with more older housing stock near the Intracoastal — which means more first-time sealing on 10-to-20-year-old pavers that need restoration-grade prep (stain extraction, sometimes stripping a failed previous coat) before sealer goes down. Budget accordingly: an older, never-maintained driveway here is more likely a $2.50+/sq ft project than a $1.10 one. See our Delray Beach sealing page.
Boynton Beach. A split market: coastal Boynton east of Federal carries salt exposure, while the big western communities (Canyon, Valencia developments) are inland HOA territory with newer pavers — typically straightforward full-protocol jobs at the standard rate, plus an ARC form.
West Palm Beach. The widest range of property types in the county — from historic districts with older brick and clay pavers (different sealer chemistry, always test-patch first) to new construction with fresh concrete pavers that need to finish effloresced before sealing. Our West Palm Beach sealing page covers the local details.
Jupiter. Northernmost area we regularly serve, and one of the saltiest: a large share of properties sit close to the Intracoastal or ocean. Marine-grade sealer isn’t a nice-to-have here — it’s the difference between a 2-year seal and a 1-year seal. Pool decks dominate the work, so non-slip finish (DCOF 0.65+) comes up on nearly every quote.
Worth naming even though they didn’t make the headline list: Wellington and the western communities are the easiest sealing geography in the county — inland, newer pavers, long intervals — and Palm Beach Gardens behaves like a blend of Jupiter’s salt exposure near the water and HOA-standard inland work west of Military Trail. The pattern across all of it is consistent: the rate card barely changes; the salt, the age of the surface, and the paperwork do.
When to Schedule Sealing in Palm Beach County
The county’s weather calendar matters more to sealing than most homeowners expect, because sealers need rain-free cure windows of 4–24 hours depending on product:
- October through May (dry season) is prime time — reliable dry windows, moderate surface temperatures, easy scheduling. If your project can wait for it, wait for it.
- June through September is workable but tactical: jobs start early to beat the afternoon storm cycle, and moisture checks become non-negotiable, because sealing over damp pavers causes the milky white haze that ruins finishes. A contractor who doesn’t mention the forecast during a summer quote is a red flag by itself.
- Book ahead of the holidays. November and December are the busiest sealing months in the county — everyone wants the driveway looking right before guests arrive. Add the 1–4 week HOA approval cycle and a Thanksgiving-ready deck is an early-October phone call.
Cure times are the same everywhere in the county: walkable in 4–6 hours, drivable in 24–48. Plan on street parking for two days on driveway jobs.
HOA and ARC: The Palm Beach County Reality
More than 60% of our Palm Beach County projects are in HOA communities, and it shapes the process more than most homeowners expect:
- Maintenance sealing is usually exempt from approval — you’re preserving, not changing. But “usually” is doing work in that sentence.
- Color-enhancing sealers change appearance, and appearance changes are exactly what ARC rules regulate. A “wet look” driveway in a community of matte driveways can generate a violation letter. If you want enhancement, get it approved first.
- Some communities regulate contractor access — insurance certificates on file, work-hour windows, gate registration. Unlicensed or uninsured crews get turned away at the gate, sometimes on the scheduled day.
- We prepare and submit the ARC application free on every HOA job. It costs us a form and saves the project two weeks of back-and-forth. Ask any contractor you’re comparing whether they handle this — the ones who’ve worked this county do.
One honest note: HOA density doesn’t raise the per-foot price, but it does reward scheduling flexibility. Approval cycles run 1–4 weeks depending on the community, so if you want your deck sealed before Thanksgiving guests, start the conversation in October, not November.
What Coastal Exposure Actually Adds
Salt air doesn’t change the invoice much — it changes the calendar. Here’s the practical version:
| Location | Realistic resealing interval (quality sealer) |
|---|---|
| East of Federal Hwy / Intracoastal & ocean proximity | 18 months–2 years |
| Central corridor (I-95 to Turnpike) | 2–2.5 years |
| Western communities (Wellington, western Boynton/Delray) | 2.5–3 years |
Salt accelerates surface erosion — most aggressively on natural stone like travertine and marble, more slowly on dense concrete pavers. The failure mode isn’t dramatic; the sealer just wears through sooner on the exposure side of the house. Two implications for cost planning:
- Coastal owners should budget the same per-job price but ~30% more jobs per decade. A coastal Boca pool deck sealed for $900 every 2 years costs ~$4,500 over ten years; the same deck in Wellington at 3-year intervals costs ~$3,000.
- Sealer quality matters more at the coast, not less. A cheap sealer that lasts 18 months inland lasts 12 at the beach. The budget tier is at its worst exactly where conditions are hardest — which sealer chemistry holds up here is covered in our best paver sealer for Florida guide.
The water-bead test works everywhere: pour a cup of water on the pavers, and if it soaks in instead of beading, the sealer is done regardless of what the calendar says.
Sample Quotes by Property Type
Real-world Palm Beach County examples at full-protocol quality ($1.10–$1.50/sq ft), assuming sound pavers without stripping needs:
Driveway — 1,000 sq ft, western Boynton Beach HOA community. Pre-treatment, oscillating wash, two rust-stain extractions at the sprinkler line, polymeric re-sand, breathable sealer, ARC application included. $1,100–$1,400. Walkable in 4–6 hours, drivable in 24–48.
Pool deck — 700 sq ft travertine, coastal Boca Raton. Penetrating breathable sealer (film-formers are wrong for travertine), non-slip finish maintained at DCOF 0.65+, salt-exposure counseling toward an 18–24 month interval. $850–$1,050. Screened-enclosure access adds a little time, not much money.
Patio + walkway — 450 sq ft, Delray Beach, 15 years old, never sealed. This is the honest curveball: heavy organic staining and washed-out joints push it toward restoration-grade. Deep pre-treatment, stain extraction, full re-sand, then sealer. $900–$1,200 — more per foot than the driveway above, because condition, not size, drives the work.
Combined driveway + pool deck — 1,500 sq ft, Jupiter. The most cost-efficient way to buy sealing: one mobilization, one setup. $1,650–$2,200 for both surfaces, versus roughly $2,000–$2,500 quoted separately.
All of these sit inside the typical Florida project window of $400–$2,000, with combined jobs occasionally topping it.
How to Compare Local Quotes Without Getting Burned
Palm Beach County has no shortage of trucks with pressure washers, and the quote spread on the same driveway can be startling. Three filters do most of the work:
Make every bidder name their scope. Square footage, rate, prep steps listed individually (pre-treatment, stain extraction, re-sanding), the sealer by product name, and the warranty term in writing. A quality-tier contractor produces this without being asked twice. A one-line quote is a scope that can quietly shrink on job day.
Ask specifically about breathability. Florida’s ground moisture rises through pavers year-round; a non-permeable commodity sealer traps it, whitens, and peels — the single most common failure we’re hired to strip and redo, at $1–$2 per square foot on top of resealing. “Is your sealer vapor-permeable?” is a five-second question that eliminates half the budget tier.
Verify the license. Florida requires it, and in gated communities an unlicensed crew may not make it past the gatehouse on the scheduled morning anyway. Ours is CILB #U-22487, on every quote and every ARC application. Licensed also means insured, and insured means a sprinkler head or a pool cage panel that gets damaged is the contractor’s problem rather than a negotiation.
The pattern behind all three: the budget tier survives on comparisons that stop at the bottom-line number. Any comparison that reaches one level deeper — into what’s actually being done — reorders the list.
The Bottom Line
In Palm Beach County, plan on $1.10–$1.50 per square foot for sealing done properly, a total of $400–$2,000 for most projects, and a resealing interval of 2–3 years inland or 18–24 months near the coast. The per-foot price barely moves across the county; what moves is the interval (salt), the prep (age and condition), and the paperwork (HOA).
If you want a real number for your specific property, our paver sealing service starts at $1.10/sq ft with the full protocol and a 3-year written warranty. Assessments are free anywhere in Palm Beach and Broward County, the ARC application is on us, and if your pavers aren’t ready to seal, we’ll tell you that too.