How long does a wet look sealer last in the Florida sun?

Typically 2–3 years in Pompano Beach's coastal environment. UV exposure gradually dulls the gloss and the sealer itself breaks down. Annual inspections help catch it before it starts to peel — peeling is what happens when a film sealer fails and it's more expensive to fix than a planned reseal.

My pavers have some old staining — will the wet look cover it up?

No — wet look sealers are transparent and will actually make staining more visible by deepening the color of everything on the surface, including stains. The surface needs to be professionally cleaned and any staining addressed before the sealer goes on. We handle the full prep as part of the job.

How much does a wet look sealer cost in Pompano Beach?

Wet look sealing in Pompano Beach runs $1.00–$1.75 per square foot — slightly more than a clear sealer because the surface prep required for a gloss finish is more involved. A driveway or pool deck of 600–1,200 sq ft typically runs $600–$2,100. If old failed sealer needs to be stripped first, that adds to the cost. All estimates are free and on-site — call (954) 478-4674.

When is the best time to apply a wet look sealer in coastal South Florida?

Spring (March–May) or October–November. Avoid the rainy season entirely — a wet look film sealer is especially sensitive to rain during the cure window and will cloud if moisture gets on the surface before it's set. In Pompano Beach, we also avoid application during midday in summer: the combination of heat and salt air can cause the gloss coat to set unevenly. Early morning scheduling in the dry season gives the best result.

Pompano Beach, FL · Broward County 5.0 · Google Reviews

Best Wet Look Paver Sealer in Pompano Beach, FL

Get a rich, glossy wet look finish on pavers or stamped concrete in Pompano Beach. Expert application by Craft Pavers — free estimate, licensed & insured.

Get a Free Estimate in Pompano Beach 954-478-4674

Why It Matters in Pompano Beach

What Works in Pompano Beach — and Why

Coastal pavers and stamped concrete that get the wet look treatment end up looking genuinely impressive — the natural tones in travertine, coral stone, or concrete pavers saturate and deepen in a way that plain maintenance never achieves. In Pompano Beach and beachside Fort Lauderdale neighborhoods, a lot of high-end homes use this finish to make driveways and pool surrounds look like they belong in a design magazine. The sealer also provides real protection against salt and moisture, which is important this close to the water. The tradeoff: any existing stains or faded patches will show through, so the surface needs a thorough clean first.

What the Coast Does to Your Pavers

Living near the water is great — until you look at your pavers. Salt blows in off the ocean, settles into the surface, and slowly eats away at the finish. Add Florida's intense sun beating down all day and the humidity that never really goes away, and you've got a recipe for pavers that fade, stain, and grow algae faster than anywhere else in the county. Dark spots, slippery green film, and a chalky, washed-out color are all signs the coast is taking its toll. The good news: the right sealer creates a barrier that keeps the salt and moisture out — and your pavers looking the way they did when they were first installed.

What a Wet Look Sealer Does

If you want your pavers or stamped concrete to look like they just got rained on — rich, saturated color, a subtle gloss — this is the sealer for that. The wet look finish deepens the natural tones in the stone and gives the whole surface a finished, intentional appearance. It's a popular choice for driveways and pool decks where people want the space to look designed, not just maintained. Tinted options can also shift or enhance the existing color if the surface has faded. One thing to know: this finish is more visible than a clear coat, so surface prep matters — any stains or uneven spots will show through.

Licensed & Insured

Free On-Site Estimate

HOA Compliant

Same-Week Scheduling

Common Questions from Pompano Beach Homeowners

Frequently Asked Questions

A standard gloss sealer does increase slipperiness when wet. For pool decks and any surface that gets wet regularly, we add a non-slip aluminum oxide additive to the sealer mix. This maintains the wet look appearance while keeping the surface safe for bare feet.

Ready to Protect Your Pavers in Pompano Beach?

Free on-site assessment. Transparent pricing delivered within 24 hours. Licensed, insured, and serving Broward County for over a decade.

Get a Free Estimate 954-478-4674